Publications | DSSI Lab

Selected journal articles are listed in reverse chronological order, with representative refereed conference proceedings included below. For the complete and continuously updated record, see Dr. Sun’s Google Scholar profile.

2026

Adv. Funct. Mater.

3D Printing Innovations in Polymeric Porous and Patterned Architecture

D. Patil, S. V. Thummalapalli, C. Westover, and 11 more authors

Advanced Functional Materials, 2026

Accepted

Bib

@article{patil2026afm,
  title = {3D Printing Innovations in Polymeric Porous and Patterned Architecture},
  author = {Patil, D. and Thummalapalli, S. V. and Westover, C. and Ramanathan, A. and Sobczak, M. T. and Patil, R. and Xiang, Q. and Li, T. and Yang, S. and Long, T. E. and Sun, H. and Wang, X. and Liu, Y. and Song, K.},
  journal = {Advanced Functional Materials},
  year = {2026},
  note = {Accepted},
}

JQT

Adapting OpenAI’s CLIP Model for Few-Shot Image Inspection in Manufacturing Quality Control: An Expository Case Study with Multiple Application Examples

F. M. Megahed, Y. Chen, B. M. Colosimo, and 5 more authors

Journal of Quality Technology, 2026

Accepted

Bib

@article{megahed2026clip,
  title = {Adapting OpenAI's CLIP Model for Few-Shot Image Inspection in Manufacturing Quality Control: An Expository Case Study with Multiple Application Examples},
  author = {Megahed, F. M. and Chen, Y. and Colosimo, B. M. and Grasso, M. L. G. and Jones-Farmer, L. A. and Knoth, S. and Sun, H. and Zwetsloot, I.},
  journal = {Journal of Quality Technology},
  year = {2026},
  note = {Accepted},
}

Addit. Manuf.

System-Level Multi-Stage Modeling and Multi-Criteria Optimization of Direct Ink Writing

W. Chen, C. Xu, C. Zhou, and 1 more author

Additive Manufacturing, 2026

Awarded Bib

Finalist, IISE 2026 M&D Best Student Paper Award

@article{chen2026system,
  title = {System-Level Multi-Stage Modeling and Multi-Criteria Optimization of Direct Ink Writing},
  author = {Chen, W. and Xu, C. and Zhou, C. and Sun, H.},
  journal = {Additive Manufacturing},
  volume = {119},
  pages = {105122},
  year = {2026},
}

ASME JMSE

Smart Ambient Drying for Carbon-Negative Biomass Manufacturing

C. Xu, L. Liang, W. Chen, and 5 more authors

ASME Transactions, Journal of Manufacturing Science and Engineering, 2026

Bib

@article{xu2026drying,
  title = {Smart Ambient Drying for Carbon-Negative Biomass Manufacturing},
  author = {Xu, C. and Liang, L. and Chen, W. and Zhuang, X. and Guo, Z. and Li, D. and Zhou, C. and Sun, H.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  pages = {1--12},
  year = {2026},
}

Adv. Sci.

AI-Directed 3D Printing of Hierarchical Polyurethane Foams

D. Patil, J. Tian, K. Jiang, and 12 more authors

Advanced Science, 2026

Bib

@article{patil2026foams,
  title = {AI-Directed 3D Printing of Hierarchical Polyurethane Foams},
  author = {Patil, D. and Tian, J. and Jiang, K. and Westover, C. and Thummalapalli, S. V. and Sobczak, M. T. and Crutchfield, N. and Ramanathan, A. and Lee, S. and Sun, H. and Brisbois, E. J. and Handa, H. and Long, T. and Wang, X. and Song, K.},
  journal = {Advanced Science},
  volume = {13},
  number = {8},
  pages = {e15122},
  year = {2026},
}

ASME MSEC

Autoinspector: An Autonomous Robotic Scanning Framework for Quality Inspection

N. Silwal, O. Connell, D. Dawson, and 3 more authors

In ASME 2026 21st International Manufacturing Science and Engineering Conference (MSEC), 2026

Accepted

Bib

@inproceedings{silwal2026autoinspector,
  title = {Autoinspector: An Autonomous Robotic Scanning Framework for Quality Inspection},
  author = {Silwal, N. and Connell, O. and Dawson, D. and Boblitz, C. and Zhou, C. and Sun, H.},
  booktitle = {ASME 2026 21st International Manufacturing Science and Engineering Conference (MSEC)},
  year = {2026},
  note = {Accepted},
}

ACL

IntrAgent: An LLM Agent for Content-Grounded Information Retrieval through Literature Review

F. Ma, Z. Rao, X. Li, and 5 more authors

In Proceedings of the 63rd Annual Meeting of the Association for Computational Linguistics (ACL), 2026

Accepted

Bib

@inproceedings{ma2026intragent,
  title = {IntrAgent: An LLM Agent for Content-Grounded Information Retrieval through Literature Review},
  author = {Ma, F. and Rao, Z. and Li, X. and Chen, Z. and Sun, H. and Chen, X. and Zhao, Y. and Xiang, Z.},
  booktitle = {Proceedings of the 63rd Annual Meeting of the Association for Computational Linguistics (ACL)},
  year = {2026},
  note = {Accepted},
}

2025

Adv. Intell. Discov.

CrossMatAgent: AI-Assisted Design of Manufacturable Metamaterial Patterns via a Multi-Agent Generative Framework

J. Tian, M. Sobczak, D. Patil, and 10 more authors

Advanced Intelligent Discovery, 2025

Bib

@article{tian2025crossmatagent,
  title = {CrossMatAgent: AI-Assisted Design of Manufacturable Metamaterial Patterns via a Multi-Agent Generative Framework},
  author = {Tian, J. and Sobczak, M. and Patil, D. and Hou, J. and Pang, L. and Ramanathan, A. and Yang, L. and Chen, X. and Golan, Y. and Zhai, X. and Sun, H. and Song, K. and Wang, X.},
  journal = {Advanced Intelligent Discovery},
  pages = {202500063},
  year = {2025},
}

ASME JMSE

Process Control for Direct Ink Writing of Composite Materials via Reinforcement Learning

Z. Li, W. Chen, Z. Guo, and 2 more authors

ASME Transactions, Journal of Manufacturing Science and Engineering, 2025

Bib

@article{li2025diw,
  title = {Process Control for Direct Ink Writing of Composite Materials via Reinforcement Learning},
  author = {Li, Z. and Chen, W. and Guo, Z. and Zhou, C. and Sun, H.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  volume = {147},
  number = {9},
  pages = {091009},
  year = {2025},
}

Manuf. Lett.

EthicalFab: Toward an Ethical Fabrication Process through Privacy-Preserving Illegal Product Detection

M. Kang and H. Sun

Manufacturing Letters, 2025

Bib

@article{kang2025ethicalfab,
  title = {EthicalFab: Toward an Ethical Fabrication Process through Privacy-Preserving Illegal Product Detection},
  author = {Kang, M. and Sun, H.},
  journal = {Manufacturing Letters},
  volume = {44},
  pages = {1425--1431},
  year = {2025},
}

ACS SRM

Life Cycle Analysis of Coaxial Layered Fiber Spinning for Wind Turbine Blade Recycling

M. T. Sobczak, G. Li, A. Ramanathan, and 7 more authors

ACS Sustainable Resource Management, 2025

Bib

@article{sobczak2025lca,
  title = {Life Cycle Analysis of Coaxial Layered Fiber Spinning for Wind Turbine Blade Recycling},
  author = {Sobczak, M. T. and Li, G. and Ramanathan, A. and Thummalapalli, S. and Thippanna, V. and Bick, L. R. and Sun, H. and Nolet, S. and Li, K. and Song, K.},
  journal = {ACS Sustainable Resource Management},
  volume = {2},
  number = {5},
  pages = {721--732},
  year = {2025},
}

ASME JMSE

High-Fidelity Sensing Modality for Anomaly Detection in Inkjet Printing

A. Chivate, H. Sun, and C. Zhou

ASME Transactions, Journal of Manufacturing Science and Engineering, 2025

Bib

@article{chivate2025sensing,
  title = {High-Fidelity Sensing Modality for Anomaly Detection in Inkjet Printing},
  author = {Chivate, A. and Sun, H. and Zhou, C.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  volume = {147},
  number = {2},
  pages = {021004},
  year = {2025},
}

IEEE ICDM

Human Digital Twin: Data, Models, Applications, and Challenges

R. Pan, H. Sun, X. Chen, and 2 more authors

In IEEE International Conference on Data Mining (ICDM), 2025

Bib

@inproceedings{pan2025hdt,
  title = {Human Digital Twin: Data, Models, Applications, and Challenges},
  author = {Pan, R. and Sun, H. and Chen, X. and Pedrielli, G. and Huang, J.},
  booktitle = {IEEE International Conference on Data Mining (ICDM)},
  pages = {1--6},
  year = {2025},
}

IEEE RAMS

Developing Measurement Models Using Bayesian Neural Networks

R. Heidary, J. Williams, H. Sun, and 2 more authors

In Annual Reliability and Maintainability Symposium (RAMS), 2025

Bib

@inproceedings{heidary2025bnn,
  title = {Developing Measurement Models Using Bayesian Neural Networks},
  author = {Heidary, R. and Williams, J. and Sun, H. and Xu, C. and Moreira, P.},
  booktitle = {Annual Reliability and Maintainability Symposium (RAMS)},
  pages = {1--5},
  year = {2025},
}

2024

IISE Trans. HSE

Irregular Surface Temperature Monitoring in Liver Procurement via Time-Vertex Signal Processing

S. Hajifar and H. Sun

IISE Transactions on Healthcare Systems Engineering, 2024

Bib

@article{hajifar2024liver,
  title = {Irregular Surface Temperature Monitoring in Liver Procurement via Time-Vertex Signal Processing},
  author = {Hajifar, S. and Sun, H.},
  journal = {IISE Transactions on Healthcare Systems Engineering},
  volume = {14},
  number = {4},
  pages = {346--361},
  year = {2024},
}

IISE Trans. OEHF

Functional ANOVA for Upper-Extremity Fatigue Analysis during Order Picking

K. S. Kheiri, Z. Vahedi, H. Sun, and 2 more authors

IISE Transactions on Occupational Ergonomics and Human Factors, 2024

Awarded Bib

IISE Transactions Feature Paper

@article{kheiri2024fanova,
  title = {Functional ANOVA for Upper-Extremity Fatigue Analysis during Order Picking},
  author = {Kheiri, K. S. and Vahedi, Z. and Sun, H. and Megahed, M. F. and Cavuoto, A. L.},
  journal = {IISE Transactions on Occupational Ergonomics and Human Factors},
  volume = {11},
  number = {3-4},
  pages = {123--135},
  year = {2024},
}

ASME MSEC

Investigating Jet Stability in Inkjet Printing through a Novel Sensing Modality

A. Chivate, Z. Li, P. R. Kamble, and 2 more authors

In ASME 2024 19th International Manufacturing Science and Engineering Conference (MSEC), 2024

Bib

@inproceedings{chivate2024jet,
  title = {Investigating Jet Stability in Inkjet Printing through a Novel Sensing Modality},
  author = {Chivate, A. and Li, Z. and Kamble, P. R. and Sun, H. and Zhou, C.},
  booktitle = {ASME 2024 19th International Manufacturing Science and Engineering Conference (MSEC)},
  year = {2024},
}

IRAIS

Federated Deep Learning for a Privacy-Preserved Activity Recognition

S. K. Kheiri, S. Valluri, H. Sun, and 1 more author

In IRAIS 2024 Proceedings, 2024

Bib

@inproceedings{kheiri2024federated,
  title = {Federated Deep Learning for a Privacy-Preserved Activity Recognition},
  author = {Kheiri, S. K. and Valluri, S. and Sun, H. and Cavuoto, L.},
  booktitle = {IRAIS 2024 Proceedings},
  year = {2024},
}

2023

Int. J. Ind. Ergon.

Human Reliability Modeling in Occupational Environments toward a Safe and Productive Operator 4.0: A Survey

K. S. Kheiri, Z. Vahedi, H. Sun, and 2 more authors

International Journal of Industrial Ergonomics, 2023

Bib

@article{kheiri2023survey,
  title = {Human Reliability Modeling in Occupational Environments toward a Safe and Productive Operator 4.0: A Survey},
  author = {Kheiri, K. S. and Vahedi, Z. and Sun, H. and Megahed, M. F. and Cavuoto, A. L.},
  journal = {International Journal of Industrial Ergonomics},
  volume = {97},
  pages = {103479},
  year = {2023},
}

IISE Trans.

Active Reinforcement Learning for CVD-Grown Two-Dimensional Materials Classification

Z. Li, F. Yao, and H. Sun

IISE Transactions, 2023

Awarded Bib

IISE Transactions Feature Paper

@article{li2023activerl,
  title = {Active Reinforcement Learning for CVD-Grown Two-Dimensional Materials Classification},
  author = {Li, Z. and Yao, F. and Sun, H.},
  journal = {IISE Transactions},
  volume = {56},
  number = {8},
  pages = {811--823},
  year = {2023},
}

Addit. Manuf.

Droplet Evolution Prediction in Material Jetting via Tensor Time Series Analysis

L. J. Segura, Z. Li, C. Zhou, and 1 more author

Additive Manufacturing, 2023

Bib

@article{segura2023droplet,
  title = {Droplet Evolution Prediction in Material Jetting via Tensor Time Series Analysis},
  author = {Segura, L. J. and Li, Z. and Zhou, C. and Sun, H.},
  journal = {Additive Manufacturing},
  volume = {66},
  pages = {103461},
  year = {2023},
}

ASME JMSE

Multi-Class Reinforced Active Learning for Droplet Behaviors Identification in Inkjet Printing

Z. Li, L. J. Segura, Y. Li, and 2 more authors

ASME Transactions, Journal of Manufacturing Science and Engineering, 2023

Bib

@article{li2023multiclass,
  title = {Multi-Class Reinforced Active Learning for Droplet Behaviors Identification in Inkjet Printing},
  author = {Li, Z. and Segura, L. J. and Li, Y. and Zhou, C. and Sun, H.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  volume = {145},
  number = {7},
  pages = {071002},
  year = {2023},
}

ASME JCISE

Teeth Mold Point Cloud Completion via Data Augmentation and Hybrid RL-GAN

J. D. Toscano, C. Zuniga-Navarrete, L. J. Segura, and 2 more authors

ASME Transactions, Journal of Computing and Information Science in Engineering, 2023

Bib

@article{toscano2023teeth,
  title = {Teeth Mold Point Cloud Completion via Data Augmentation and Hybrid RL-GAN},
  author = {Toscano, J. D. and Zuniga-Navarrete, C. and Segura, L. J. and Siu, W. D. J. and Sun, H.},
  journal = {ASME Transactions, Journal of Computing and Information Science in Engineering},
  volume = {23},
  number = {4},
  pages = {041008},
  year = {2023},
}

JOEH

The Relationship between Ratings of Perceived Exertion (RPE) and Relative Strength for a Fatiguing Dynamic Upper-Extremity Task

Z. Vahedi, K. S. Kheiri, S. Hajifar, and 4 more authors

Journal of Occupational and Environmental Hygiene, 2023

Bib

@article{vahedi2023rpe,
  title = {The Relationship between Ratings of Perceived Exertion (RPE) and Relative Strength for a Fatiguing Dynamic Upper-Extremity Task},
  author = {Vahedi, Z. and Kheiri, K. S. and Hajifar, S. and Lamooki, S. R. and Sun, H. and Megahed, M. F. and Cavuoto, A. L.},
  journal = {Journal of Occupational and Environmental Hygiene},
  volume = {20},
  number = {3-4},
  pages = {136--142},
  year = {2023},
}

2022

Appl. Ergon.

A Data-Analytic End-to-End Framework for the Automated Quantification of Ergonomic Risk Factors across Multiple Tasks Using a Single Wearable Sensor

S. R. Lamooki, S. Hajifar, J. Kang, and 3 more authors

Applied Ergonomics, 2022

Bib

@article{lamooki2022framework,
  title = {A Data-Analytic End-to-End Framework for the Automated Quantification of Ergonomic Risk Factors across Multiple Tasks Using a Single Wearable Sensor},
  author = {Lamooki, S. R. and Hajifar, S. and Kang, J. and Sun, H. and Megahed, M. F. and Cavuoto, A. L.},
  journal = {Applied Ergonomics},
  volume = {102},
  pages = {103732},
  year = {2022},
}

PLoS One

Classifying Tasks Performed by Electrical Line Workers Using a Wrist-Worn Sensor: A Data Analytic Approach

S. R. Lamooki, S. Hajifar, J. Hannan, and 3 more authors

PLoS One, 2022

Bib

@article{lamooki2022classifying,
  title = {Classifying Tasks Performed by Electrical Line Workers Using a Wrist-Worn Sensor: A Data Analytic Approach},
  author = {Lamooki, S. R. and Hajifar, S. and Hannan, J. and Sun, H. and Megahed, M. F. and Cavuoto, A. L.},
  journal = {PLoS One},
  volume = {17},
  number = {12},
  pages = {e0261765},
  year = {2022},
}

IISE Trans.

Online Domain Adaptation for Continuous Cross-Subject Liver Viability Evaluation Based on Irregular Surface Thermal Data

S. Hajifar and H. Sun

IISE Transactions, 2022

Awarded Bib

QCRE Best Student Paper Award, IISE 2021

@article{hajifar2022liver,
  title = {Online Domain Adaptation for Continuous Cross-Subject Liver Viability Evaluation Based on Irregular Surface Thermal Data},
  author = {Hajifar, S. and Sun, H.},
  journal = {IISE Transactions},
  volume = {54},
  number = {9},
  pages = {869--880},
  year = {2022},
}

Risk Anal.

Analyzing Risk of Service Failures in Heavy-Haul Rail Lines: A Hybrid Approach for Imbalanced Data

F. Ghofrani, H. Sun, and Q. He

Risk Analysis, 2022

Bib

@article{ghofrani2022rail,
  title = {Analyzing Risk of Service Failures in Heavy-Haul Rail Lines: A Hybrid Approach for Imbalanced Data},
  author = {Ghofrani, F. and Sun, H. and He, Q.},
  journal = {Risk Analysis},
  volume = {42},
  number = {8},
  pages = {1852--1871},
  year = {2022},
}

ACM SenSys

A Campus Prototype of Interactive Digital Twin in Cyber Manufacturing

M. Rubino, M. Weng, J. Chen, and 6 more authors

In Proceedings of the 20th ACM Conference on Embedded Networked Sensor Systems (SenSys), 2022

Awarded Bib

1st Place, UB Agrusa Innovation Competition

@inproceedings{rubino2022digitaltwin,
  title = {A Campus Prototype of Interactive Digital Twin in Cyber Manufacturing},
  author = {Rubino, M. and Weng, M. and Chen, J. and Saptarshi, S. and Francisco, M. and Francisco, A. and Zhou, C. and Sun, H. and Xu, W.},
  booktitle = {Proceedings of the 20th ACM Conference on Embedded Networked Sensor Systems (SenSys)},
  pages = {758--759},
  year = {2022},
}

2021

Sensors

Investigation of Heterogeneity Sources for Occupational Task Recognition via Transfer Learning

S. Hajifar, S. R. Lamooki, A. L. Cavuoto, and 2 more authors

Sensors, 2021

Bib

@article{hajifar2021heterogeneity,
  title = {Investigation of Heterogeneity Sources for Occupational Task Recognition via Transfer Learning},
  author = {Hajifar, S. and Lamooki, S. R. and Cavuoto, A. L. and Megahed, M. F. and Sun, H.},
  journal = {Sensors},
  volume = {21},
  number = {19},
  pages = {6677},
  year = {2021},
}

Nanoscale

Quantifying the CVD-Grown 2D MoS2 via Image Clustering

Z. Li, J. Lee, F. Yao, and 1 more author

Nanoscale, 2021

Bib

@article{li2021mos2,
  title = {Quantifying the CVD-Grown 2D MoS2 via Image Clustering},
  author = {Li, Z. and Lee, J. and Yao, F. and Sun, H.},
  journal = {Nanoscale},
  volume = {13},
  pages = {15324--15333},
  year = {2021},
}

Addit. Manuf.

Online Droplet Anomaly Detection from Streaming Videos in Inkjet Printing

L. J. Segura, T. Wang, C. Zhou, and 1 more author

Additive Manufacturing, 2021

Bib

@article{segura2021anomaly,
  title = {Online Droplet Anomaly Detection from Streaming Videos in Inkjet Printing},
  author = {Segura, L. J. and Wang, T. and Zhou, C. and Sun, H.},
  journal = {Additive Manufacturing},
  volume = {38},
  pages = {101835},
  year = {2021},
}

Appl. Ergon.

A Forecasting Framework for Predicting Perceived Fatigue: Using Time Series Methods to Forecast Ratings of Perceived Exertion with Features from Wearable Sensors

S. Hajifar, H. Sun, M. F. Megahed, and 3 more authors

Applied Ergonomics, 2021

Bib

@article{hajifar2021fatigue,
  title = {A Forecasting Framework for Predicting Perceived Fatigue: Using Time Series Methods to Forecast Ratings of Perceived Exertion with Features from Wearable Sensors},
  author = {Hajifar, S. and Sun, H. and Megahed, M. F. and Jones-Farmer, A. and Rashedi, E. and Cavuoto, A. L.},
  journal = {Applied Ergonomics},
  volume = {90},
  pages = {103262},
  year = {2021},
}

2020

J. Manuf. Syst.

Cyber-Coordinated Simulation for Distributed Multi-Stage Additive Manufacturing Systems

H. Sun, G. Pedrielli, G. Zhao, and 3 more authors

Journal of Manufacturing Systems, 2020

Bib

@article{sun2020cyber,
  title = {Cyber-Coordinated Simulation for Distributed Multi-Stage Additive Manufacturing Systems},
  author = {Sun, H. and Pedrielli, G. and Zhao, G. and Zhou, C. and Xu, W. and Pan, R.},
  journal = {Journal of Manufacturing Systems},
  volume = {57},
  pages = {61--71},
  year = {2020},
}

Addit. Manuf.

Unsupervised Learning for the Droplet Evolution Prediction and Process Dynamics Understanding in Inkjet Printing

J. Huang, L. J. Segura, T. Wang, and 3 more authors

Additive Manufacturing, 2020

Bib

@article{huang2020unsupervised,
  title = {Unsupervised Learning for the Droplet Evolution Prediction and Process Dynamics Understanding in Inkjet Printing},
  author = {Huang, J. and Segura, L. J. and Wang, T. and Zhao, G. and Sun, H. and Zhou, C.},
  journal = {Additive Manufacturing},
  volume = {35},
  pages = {101197},
  year = {2020},
}

ASME JMSE

Geometric Deep Learning for Shape Correspondence in Mass Customization by 3D Printing

J. Huang, H. Sun, T. Kwok, and 2 more authors

ASME Transactions, Journal of Manufacturing Science and Engineering, 2020

Bib

@article{huang2020geometric,
  title = {Geometric Deep Learning for Shape Correspondence in Mass Customization by 3D Printing},
  author = {Huang, J. and Sun, H. and Kwok, T. and Zhou, C. and Xu, W.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  volume = {142},
  number = {6},
  pages = {061003},
  year = {2020},
}

ASME JCISE

Nearest-Neighbor Gaussian Process Emulation for Tensor Responses in Freeze-Nano 3D Printing of Energy Devices

L. J. Segura, G. Zhao, C. Zhou, and 1 more author

ASME Transactions, Journal of Computing and Information Science in Engineering, 2020

Bib

@article{segura2020nngp,
  title = {Nearest-Neighbor Gaussian Process Emulation for Tensor Responses in Freeze-Nano 3D Printing of Energy Devices},
  author = {Segura, L. J. and Zhao, G. and Zhou, C. and Sun, H.},
  journal = {ASME Transactions, Journal of Computing and Information Science in Engineering},
  volume = {20},
  number = {4},
  pages = {041005},
  year = {2020},
}

IISE Trans.

Manufacturing Quality Prediction Using Smooth Spatial Variable Selection Estimator with Applications in Aerosol Jet Printed Electronics Manufacturing

Y. Li, H. Sun, X. Deng, and 3 more authors

IISE Transactions, 2020

Awarded Bib

Honorable Mention, Best Application Paper, IISE Transactions

@article{li2020quality,
  title = {Manufacturing Quality Prediction Using Smooth Spatial Variable Selection Estimator with Applications in Aerosol Jet Printed Electronics Manufacturing},
  author = {Li, Y. and Sun, H. and Deng, X. and Zhang, C. and Wang, B. and Jin, R.},
  journal = {IISE Transactions},
  volume = {52},
  number = {3},
  pages = {321--333},
  year = {2020},
}

IISE Trans.

Supervised Subgraph-Augmented Non-Negative Matrix Factorization for Interpretable Manufacturing Time Series Data Analytics

H. Sun, R. Jin, and Y. Luo

IISE Transactions, 2020

Bib

@article{sun2020ssanmf,
  title = {Supervised Subgraph-Augmented Non-Negative Matrix Factorization for Interpretable Manufacturing Time Series Data Analytics},
  author = {Sun, H. and Jin, R. and Luo, Y.},
  journal = {IISE Transactions},
  volume = {52},
  number = {1},
  pages = {120--131},
  year = {2020},
}

2018

CMPB

Non-Invasive Assessment of Liver Quality in Transplantation Based on Thermal Imaging Analysis

Q. Lan, H. Sun, J. Robertson, and 2 more authors

Computer Methods and Programs in Biomedicine, 2018

Bib

@article{lan2018liver,
  title = {Non-Invasive Assessment of Liver Quality in Transplantation Based on Thermal Imaging Analysis},
  author = {Lan, Q. and Sun, H. and Robertson, J. and Deng, X. and Jin, R.},
  journal = {Computer Methods and Programs in Biomedicine},
  volume = {164},
  pages = {31--47},
  year = {2018},
}

IEEE T-ASE

Functional Quantitative and Qualitative Models for Quality Modeling in a Fused Deposition Modeling Process

H. Sun, P. Rao, Z. Kong, and 2 more authors

IEEE Transactions on Automation Science and Engineering, 2018

Bib

@article{sun2018fdm,
  title = {Functional Quantitative and Qualitative Models for Quality Modeling in a Fused Deposition Modeling Process},
  author = {Sun, H. and Rao, P. and Kong, Z. and Deng, X. and Jin, R.},
  journal = {IEEE Transactions on Automation Science and Engineering},
  volume = {15},
  number = {1},
  pages = {393--403},
  year = {2018},
}

IEEE CASE

Cyber-Coordinated Simulation Models for Multi-Stage Additive Manufacturing of Energy Products

H. Sun, G. Pedrielli, G. Zhao, and 4 more authors

In 14th IEEE Conference on Automation Science and Engineering (CASE), 2018

Awarded Bib

Selected as a Prominent Paper

@inproceedings{sun2018cybercoordinated,
  title = {Cyber-Coordinated Simulation Models for Multi-Stage Additive Manufacturing of Energy Products},
  author = {Sun, H. and Pedrielli, G. and Zhao, G. and Bragagnolo, A. and Zhou, C. and Pan, R. and Xu, W.},
  booktitle = {14th IEEE Conference on Automation Science and Engineering (CASE)},
  pages = {893--898},
  year = {2018},
}

2017

IEEE RA-L

Ensemble Modeling of In-Situ Features for Printed Electronics Manufacturing with In-Situ Process Control Potential

Y. Li, K. Mohan, H. Sun, and 1 more author

IEEE Robotics and Automation Letters, 2017

Bib

@article{li2017ensemble,
  title = {Ensemble Modeling of In-Situ Features for Printed Electronics Manufacturing with In-Situ Process Control Potential},
  author = {Li, Y. and Mohan, K. and Sun, H. and Jin, R.},
  journal = {IEEE Robotics and Automation Letters},
  volume = {2},
  number = {4},
  pages = {1864--1870},
  year = {2017},
}

IEEE T-ASE

Functional Graphical Models for Manufacturing Process Modeling

H. Sun, S. Huang, and R. Jin

IEEE Transactions on Automation Science and Engineering, 2017

Bib

@article{sun2017fgm,
  title = {Functional Graphical Models for Manufacturing Process Modeling},
  author = {Sun, H. and Huang, S. and Jin, R.},
  journal = {IEEE Transactions on Automation Science and Engineering},
  volume = {14},
  number = {4},
  pages = {1612--1621},
  year = {2017},
}

J. Power Sources

Ensemble Engineering and Statistical Modeling for Parameter Calibration towards Optimal Design of Microbial Fuel Cells

H. Sun, S. Luo, R. Jin, and 1 more author

Journal of Power Sources, 2017

Bib

@article{sun2017mfc,
  title = {Ensemble Engineering and Statistical Modeling for Parameter Calibration towards Optimal Design of Microbial Fuel Cells},
  author = {Sun, H. and Luo, S. and Jin, R. and He, Z.},
  journal = {Journal of Power Sources},
  volume = {356},
  pages = {288--298},
  year = {2017},
}

ASME JMSE

Quality Modeling of Printed Electronics in Aerosol Jet Printing Based on Microscopic Images

H. Sun, K. Wang, Y. Li, and 2 more authors

ASME Transactions, Journal of Manufacturing Science and Engineering, 2017

Bib

@article{sun2017aerosol,
  title = {Quality Modeling of Printed Electronics in Aerosol Jet Printing Based on Microscopic Images},
  author = {Sun, H. and Wang, K. and Li, Y. and Zhang, C. and Jin, R.},
  journal = {ASME Transactions, Journal of Manufacturing Science and Engineering},
  volume = {139},
  number = {7},
  pages = {071012},
  year = {2017},
}

2016

IIE Trans.

Logistic Regression for Crystal Growth Process Modeling through Hierarchical Nonnegative Garrote-Based Variable Selection

H. Sun, X. Deng, K. Wang, and 1 more author

IIE Transactions, 2016

Bib

@article{sun2016logistic,
  title = {Logistic Regression for Crystal Growth Process Modeling through Hierarchical Nonnegative Garrote-Based Variable Selection},
  author = {Sun, H. and Deng, X. and Wang, K. and Jin, R.},
  journal = {IIE Transactions},
  volume = {48},
  number = {8},
  pages = {787--796},
  year = {2016},
}

Energies

A Review of Modeling Bioelectrochemical Systems: Engineering and Statistical Aspects

S. Luo, H. Sun, Q. Ping, and 2 more authors

Energies, 2016

Bib

@article{luo2016review,
  title = {A Review of Modeling Bioelectrochemical Systems: Engineering and Statistical Aspects},
  author = {Luo, S. and Sun, H. and Ping, Q. and Jin, R. and He, Z.},
  journal = {Energies},
  volume = {9},
  number = {2},
  pages = {111},
  year = {2016},
}

2015

ACS SCE

Multitask Lasso Model for Investigating Multimodule Design Factors, Operational Factors, and Covariates in Tubular Microbial Fuel Cells

H. Sun, S. Luo, R. Jin, and 1 more author

ACS Sustainable Chemistry & Engineering, 2015

Bib

@article{sun2015multitask,
  title = {Multitask Lasso Model for Investigating Multimodule Design Factors, Operational Factors, and Covariates in Tubular Microbial Fuel Cells},
  author = {Sun, H. and Luo, S. and Jin, R. and He, Z.},
  journal = {ACS Sustainable Chemistry \& Engineering},
  volume = {3},
  number = {12},
  pages = {3231--3238},
  year = {2015},
}

IJQHC

The Impact of Varying Patient Populations on the In-Control Performance of the Risk-Adjusted CUSUM Chart

W. Tian, H. Sun, X. Zhang, and 1 more author

International Journal for Quality in Health Care, 2015

Bib

@article{tian2015cusum,
  title = {The Impact of Varying Patient Populations on the In-Control Performance of the Risk-Adjusted CUSUM Chart},
  author = {Tian, W. and Sun, H. and Zhang, X. and Woodall, W. H.},
  journal = {International Journal for Quality in Health Care},
  volume = {27},
  number = {1},
  pages = {31--36},
  year = {2015},
}